Skip to main content

Flow over Gabion Weirs

Research Abstract
A conventional weir typically consists of an impermeable body constructed of concrete, since its primary functions are to heading up water and efficiently regulate flow. However, an impermeable body prevents the longitudinal movement of aquatic life and transportation of physical and chemical substances in water, eventually having a negative impact on the water environment. One of the advantages of gabions as a building material is that the motion of individual stones comprising the gabion is not of much concern. The wire mesh of the gabion basket serves to restrain any significant movement. Also, gabion weirs offer an alternative design that could be adopted for flash flood mitigation. In this study, a series of laboratory experiments was performed in order to investigate the flow over gabion weirs. For this purpose, two different gabion weir models were tested in two horizontal laboratory flumes of 10-m and 17-m length, 0.3-m width, and 0.3- and 0.5-m depth, respectively, for a wide range of discharge, upstream water depth, downstream water depth, weir height, weir length, and gabion filling gravel material size. The results of the gabion weir were compared with those of experiments carried out on solid weirs having the same dimension and it was found that there is a large deviation when the solid weirs equation is applied to gabion weirs permeable weirs. So, using one of the existing solid weir flow formulas would lead to an erroneous calculated value. Multiple regression equations based on the dimensional analysis theory were developed for computing the discharge over gabion weirs for both free and submerged flow regimes. Also, equations were introduced for computing the discharge coefficient to be applied with the traditional solid weir equation.
Research Authors
Hassan I. Mohamed
Research Department
Research Journal
JOURNAL OF IRRIGATION AND DRAINAGE ENGINEERING © ASCE
Research Pages
PP.573-577
Research Vol
Vol.36, No.8
Research Year
2010

A hybrid printed monopole antenna loaded with dielectric resonator for wideband and circular polarization applications

Research Abstract
This article presents a novel compactcircularly polarized antenna with wideband operation. The proposed antenna consists of a microstrip-line-fed printed monopole, a finite truncated ground, and a dielectric resonator (DR). Compared to the printed monopole antenna, the proposed DR-loaded antenna has an increased impedance bandwidth, a large axial ratiobandwidth, and a good realized gain across the desired frequency range. An antenna prototype is fabricated and experimentally tested. The measured antenna impedance match is better than _10 dB over 90% from 4.5 to 11.8 GHz frequency band and the 3-dB axial-ratio bandwidth is better than 35% covering the 5.4–7.65 GHz frequency band.
Research Authors
O. M. Haraz, A. R. Sebak, and T. A. Denidni
Research Department
Research Journal
International Journal of RF and Microwave Computer-Aided Engineering
Research Member
Research Pages
Pages 588–593
Research Publisher
Wiley
Research Rank
1
Research Vol
Volume 22, Issue 5
Research Year
2012

Multiple representations for situated agent-based learning

Research Authors
Gero, J. S. and Reffat, R. M.
Research Journal
in B. Verma and X. Yao (eds), International Conference on Computational Intelligence and Multimedia Applications (ICCIMA’97), Griffith University, Gold Coast, Queensland, Australia
Research Member
Research Pages
PP. 81-85
Research Year
1997
Subscribe to