Two simple, selective, precise and highly sensitive high-performance thin-layer chromatography (HPTLC) methods have been developed and validated for analysis of five angiotensin II receptor antagonists, namely losartan, irbesartan valsartan, candesartan and olmesartan, which are widely used in clinical practice. HPTLC of the drugs was performed on pre-coated silica gel HPTLC plates 60 F254 by development using a mobile phase composed of chloroform–acetone–glacial acetic acid (7.8:1.5:0.7 m v/v/v), which was suitable for all of the studied drugs. The first method depended on utilizing reflectance/fluorescence mode for detection while the second method depended on using 2,3,5,6-tetrachloro-1,4-benzoquinone as spraying reagent for the first time to form orange spots scanned at 460 nm. A good linear relationship was obtained over the concentration ranges of 1.2–60 and 360–3000 ng/band while detection and quantification limits were in the ranges of 0.07–0.43, 45.2–140.49 and 0.21–1.29, 137.05–425.74 ng/band for reflectance/fluorescence and reflectance/absorbance methods respectively. The developed methods were applied successfully for their determination in tablets and spiked human plasma for reflectance/fluorescence method with good accuracy and precision, and so can be applied in the pharmacokinetic and bioavailability studies.

NULL

NULL

NULL

NULL

Two simple and sensitive spectrofluorimetric methods were developed for determination of three water-soluble vitamins (B1, B2, and B6) in mixtures in the presence of cyanocobalamin. The first one was for thiamine determination, which depends on the oxidation of thiamine HCl to thiochrome by iodine in an alkaline medium. The method was applied accurately to determine thiamine in binary, ternary, and quaternary mixtures with pyridoxine HCl, riboflavin, and cyanocobalamin without interference. In the second method, riboflavin and pyridoxine HCl were determined fluorimetrically in acetate buffer, pH 6. The three water-soluble vitamins (B1, B2, and B6) were determined spectrofluorimetrically in binary, ternary, and quaternary mixtures in the presence of cyanocobalamin. All variables were studied in order to optimize the reaction conditions. Linear relationship was obeyed for all studied vitamins by the proposed methods at their corresponding exc or em. The linear calibration curves were obtained from 10 to 500 ng/mL; the correlation ranged from 0.9991 to 0.9999. the suggested procedures were applied to the analysis of the investigated vitamins in their laboratory-prepared mixtures and pharmaceutical dosage forms from different manufacturers. The RSD range was 0.46-1.02%, which indicates good precision. No interference was observed from common pharmaceutical additives. Good recoveries (97.6  0.7 – 101.2  0.8%) were obtained. Statistical comparison of the results with reported methods shows excellent agreement and indicates no significant difference in accuracy and precision.

Two simple and sensitive spectrofluorimetric methods were developed for determination of three water-soluble vitamins (B1, B2, and B6) in mixtures in the presence of cyanocobalamin. The first one was for thiamine determination, which depends on the oxidation of thiamine HCl to thiochrome by iodine in an alkaline medium. The method was applied accurately to determine thiamine in binary, ternary, and quaternary mixtures with pyridoxine HCl, riboflavin, and cyanocobalamin without interference. In the second method, riboflavin and pyridoxine HCl were determined fluorimetrically in acetate buffer, pH 6. The three water-soluble vitamins (B1, B2, and B6) were determined spectrofluorimetrically in binary, ternary, and quaternary mixtures in the presence of cyanocobalamin. All variables were studied in order to optimize the reaction conditions. Linear relationship was obeyed for all studied vitamins by the proposed methods at their corresponding exc or em. The linear calibration curves were obtained from 10 to 500 ng/mL; the correlation ranged from 0.9991 to 0.9999. the suggested procedures were applied to the analysis of the investigated vitamins in their laboratory-prepared mixtures and pharmaceutical dosage forms from different manufacturers. The RSD range was 0.46-1.02%, which indicates good precision. No interference was observed from common pharmaceutical additives. Good recoveries (97.6  0.7 – 101.2  0.8%) were obtained. Statistical comparison of the results with reported methods shows excellent agreement and indicates no significant difference in accuracy and precision.

Two simple and sensitive spectrofluorimetric methods were developed for determination of three water-soluble vitamins (B1, B2, and B6) in mixtures in the presence of cyanocobalamin. The first one was for thiamine determination, which depends on the oxidation of thiamine HCl to thiochrome by iodine in an alkaline medium. The method was applied accurately to determine thiamine in binary, ternary, and quaternary mixtures with pyridoxine HCl, riboflavin, and cyanocobalamin without interference. In the second method, riboflavin and pyridoxine HCl were determined fluorimetrically in acetate buffer, pH 6. The three water-soluble vitamins (B1, B2, and B6) were determined spectrofluorimetrically in binary, ternary, and quaternary mixtures in the presence of cyanocobalamin. All variables were studied in order to optimize the reaction conditions. Linear relationship was obeyed for all studied vitamins by the proposed methods at their corresponding exc or em. The linear calibration curves were obtained from 10 to 500 ng/mL; the correlation ranged from 0.9991 to 0.9999. the suggested procedures were applied to the analysis of the investigated vitamins in their laboratory-prepared mixtures and pharmaceutical dosage forms from different manufacturers. The RSD range was 0.46-1.02%, which indicates good precision. No interference was observed from common pharmaceutical additives. Good recoveries (97.6  0.7 – 101.2  0.8%) were obtained. Statistical comparison of the results with reported methods shows excellent agreement and indicates no significant difference in accuracy and precision.

Two simple and sensitive spectrofluorimetric methods were developed for determination of three water-soluble vitamins (B1, B2, and B6) in mixtures in the presence of cyanocobalamin. The first one was for thiamine determination, which depends on the oxidation of thiamine HCl to thiochrome by iodine in an alkaline medium. The method was applied accurately to determine thiamine in binary, ternary, and quaternary mixtures with pyridoxine HCl, riboflavin, and cyanocobalamin without interference. In the second method, riboflavin and pyridoxine HCl were determined fluorimetrically in acetate buffer, pH 6. The three water-soluble vitamins (B1, B2, and B6) were determined spectrofluorimetrically in binary, ternary, and quaternary mixtures in the presence of cyanocobalamin. All variables were studied in order to optimize the reaction conditions. Linear relationship was obeyed for all studied vitamins by the proposed methods at their corresponding exc or em. The linear calibration curves were obtained from 10 to 500 ng/mL; the correlation ranged from 0.9991 to 0.9999. the suggested procedures were applied to the analysis of the investigated vitamins in their laboratory-prepared mixtures and pharmaceutical dosage forms from different manufacturers. The RSD range was 0.46-1.02%, which indicates good precision. No interference was observed from common pharmaceutical additives. Good recoveries (97.6  0.7 – 101.2  0.8%) were obtained. Statistical comparison of the results with reported methods shows excellent agreement and indicates no significant difference in accuracy and precision.

In this contribution, the utility of sequential injection analysis in combination with surface-enhanced Raman spectroscopy (SERS) as a detection technique was investigated for simultaneous determination of aspirin and vitamin C in their pharmaceutical dosage forms and in spiked urine samples. The silver substrate was synthesized in situ by laser-induced photochemical procedure. By focusing the laser on a flow cell at 1 ml/min of continuous flow of 0.5 mM silver nitrate and 5 mM sodium citrate mixture, an active silver spot on the inner wall of the flow cell was prepared in a few seconds. The whole setup is fully computer controlled using ATLAS software to combine the two techniques. The system allows sequential determination of aspirin concentrations ranging from 100 to 500 ng/ml and vitamin C concentrations between 10 and 110 ng/ml with good precision of relative standard deviations (RSDs) of 0.85 and 1.7 %, respectively. A comparison of these results with those of the reported procedures showed excellent results compared with t and F values, indicating good accuracy and precision. The detection limits were 32 and 3 ng/ml for aspirin and vitamin C, respectively.