There has been a significant concern regarding the potential health risks for humans and animals via foods and feeds that are contaminated with different agents. Particularly, mycotoxin contamination is of great importance as it is widespread and unpreventable. In both foods and feeds, molds produce secondary metabolites called mycotoxins; these are produced generally after the fungi reach their maturity. Depending on the definition used, hundreds of fungal compounds are recognized as mycotoxins. However, the attention is mainly focused on aflatoxins, ochratoxins, fumunisins, and zearalenone which are considered the most important threats for human and animal health. Mycotoxin contamination causes a fundamental problem all over the world including developed countries. Additionally, the economic impact of mycotoxins is another global concern on the agricultural markets. These concerns are based on toxicological data, which show that naturally occurring levels of mycotoxins have adverse effects in farm and laboratory animals as well as humans. The diversity of mycotoxin structures induces various toxic effects. Owing to the significant health risks and economic impacts, considerable investigations are being performed to diminish their harmful effects and to prevent their formation. In order to limit their levels, much research has been focused on detecting the mycotoxins in contaminated food and feedstuffs. This review will focus on information about primary mycotoxins, their occurrence, related regulations, prevention and methods of detection within the light of the current literature.

NULL

Anaerobic digestion for biogas production is one of the most used technology for bioenergy. However, the adoption of nanoparticles still needs further studies. Therefore, this study was designed to examine the effect of metal oxide nanoparticles (MONPs) at four different concentrations in two different combinations, 20 (R1) and 100 (R2) mg/L for Fe2O3, 100 (R3) and 500 (R4) mg/L for TiO2, and a mixture of Fe2O3 and TiO2 at rates of 20, 500 (R5) and 100, and 500 (R6), on hydrogen sulfide (H2S) mitigation, biogas, and methane (CH4) yield during the anaerobic digestion of cattle manure (CM) using an anaerobic batch system. The results showed that H2S production was 2.13, 2.38, 2.37, 2.51, 2.64, and 2.17 times lower than that of the control (R0), respectively, when the CM was treated by the aforementioned MONPs. Additionally, biogas and CH4 production were 1.09 and 1.105, 1.15 and 1.191, 1.07 and 1.097, 1.17 and 1.213, 1.10 and 1.133, and 1.13 and 1.15 times higher than those of R0 when R1, R2, R3, R4, R5, and R6 were supplemented with MONPs, respectively. The highest specific production of biogas and CH4 was 336.25 and 192.31 mL/gVS, respectively, which was achieved by R4 supplemented with 500 mg/L TiO2 NPs, while the corresponding values in the case of R0 were 286.38 and 158.55 mL/gVS

Anaerobic digestion for biogas production is one of the most used technology for bioenergy. However, the adoption of nanoparticles still needs further studies. Therefore, this study was designed to examine the effect of metal oxide nanoparticles (MONPs) at four different concentrations in two different combinations, 20 (R1) and 100 (R2) mg/L for Fe2O3, 100 (R3) and 500 (R4) mg/L for TiO2, and a mixture of Fe2O3 and TiO2 at rates of 20, 500 (R5) and 100, and 500 (R6), on hydrogen sulfide (H2S) mitigation, biogas, and methane (CH4) yield during the anaerobic digestion of cattle manure (CM) using an anaerobic batch system. The results showed that H2S production was 2.13, 2.38, 2.37, 2.51, 2.64, and 2.17 times lower than that of the control (R0), respectively, when the CM was treated by the aforementioned MONPs. Additionally, biogas and CH4 production were 1.09 and 1.105, 1.15 and 1.191, 1.07 and 1.097, 1.17 and 1.213, 1.10 and 1.133, and 1.13 and 1.15 times higher than those of R0 when R1, R2, R3, R4, R5, and R6 were supplemented with MONPs, respectively. The highest specific production of biogas and CH4 was 336.25 and 192.31 mL/gVS, respectively, which was achieved by R4 supplemented with 500 mg/L TiO2 NPs, while the corresponding values in the case of R0 were 286.38 and 158.55 mL/gVS

Anaerobic digestion for biogas production is one of the most used technology for bioenergy. However, the adoption of nanoparticles still needs further studies. Therefore, this study was designed to examine the effect of metal oxide nanoparticles (MONPs) at four different concentrations in two different combinations, 20 (R1) and 100 (R2) mg/L for Fe2O3, 100 (R3) and 500 (R4) mg/L for TiO2, and a mixture of Fe2O3 and TiO2 at rates of 20, 500 (R5) and 100, and 500 (R6), on hydrogen sulfide (H2S) mitigation, biogas, and methane (CH4) yield during the anaerobic digestion of cattle manure (CM) using an anaerobic batch system. The results showed that H2S production was 2.13, 2.38, 2.37, 2.51, 2.64, and 2.17 times lower than that of the control (R0), respectively, when the CM was treated by the aforementioned MONPs. Additionally, biogas and CH4 production were 1.09 and 1.105, 1.15 and 1.191, 1.07 and 1.097, 1.17 and 1.213, 1.10 and 1.133, and 1.13 and 1.15 times higher than those of R0 when R1, R2, R3, R4, R5, and R6 were supplemented with MONPs, respectively. The highest specific production of biogas and CH4 was 336.25 and 192.31 mL/gVS, respectively, which was achieved by R4 supplemented with 500 mg/L TiO2 NPs, while the corresponding values in the case of R0 were 286.38 and 158.55 mL/gVS

NULL

NULL

NULL

NULL